How to Install Tritium Tubes
1.Prepare Tools and Materials
● UV glue (ensure it is of reliable quality).
● UV light (to cure the UV glue).
2.Installation Steps
● Ensure the installation area is clean, free of dust and grease.
● Apply a small amount of UV glue to the installation groove or surface, avoiding excessive glue to prevent overflow.
● Gently place the tritium tube into the groove and adjust it to the correct position.
● Use the UV light to cure the glue by shining it on the glued area. Follow the curing time specified in the glue instructions, typically a few seconds to a few minutes.
3.Safety Check
● Ensure the tritium tube is securely fixed without any looseness or displacement.
● Confirm that the installation area is clean and free of excess glue residue.
Note:
● Handle the tritium tube carefully to avoid damage or breakage.
● Work in a well-ventilated area to ensure safety.